10hp Eurorack Multi-Function Module Difficulty level: Intermediate/Expert Time: 2-3 hours This is a Build Guide for the Ornament and Crime 4.1 (aka O.R.N.8.) module. This is a module that runs 4 iterations of Phazerville apps at one time, in addition to a stereo or dual mono DSP processing pipeline. SOFT WARNING This module is extremely dense, so the build is quite challenging. Incorrect soldering or damage to components can be devastating, since many components are quite

18HP Random Sampler Module Difficulty Level: Beginner/Intermediate Time: 1-2 Hours What you'll need Immutable Marbles DIY kit Soldering Iron Solder Side cutters Verify parts Begin by pulling out all of the parts included in your Marbles DIY kit and reference the bill of materials to ensure you're not missing anything. Itty bitty parts, not shown Pots and Jacks! Placing and soldering components Begin by placing the 10-pin header on the backside of the PCB in the orientation sh

I designed a case for the Norns Shield , an Open Source DIY sound computer with a fantastic community. This case is available here and...

4HP Logic Utility Module Difficulty Level: Beginner Time: 1-2 Hours What you'll need Immutable Kinks DIY kit Soldering Iron Solder Side...

I recently acquired a Hammond X-5 "portable" organ. It included the leslie and foot pedals, but only half of the keys worked. I bought it...

14hp Eurorack Resonator Difficulty level: Beginner Time: 1-2 hours What you'll need Immutable Rings DIY kit Soldering Iron Solder Side...

8 HP Multi function signal generator Difficulty level: Beginner Time: 1-2 hours What you'll need Immutable Peaks DIY kit Soldering Iron...

12hp Eurorack Macro Oscillator Difficulty level: Beginner Time: 1-2 hours What you'll need Immutable Plaits DIY kit Soldering Iron Solder...

4hp Eurorack contact mic and amplifier Difficulty level: Beginner Time: 1-2 hours What you'll need Ears DIY kit Soldering Iron Solder...

THE GRANULAR KING We are building IMMUTABLE CLOUDS, a DIY Clouds kit. All components are included (like all Immutable kits), all you need...

Fade 4 is a performance MIDI and CV controller with 10cm faders and housed in a robust aluminum enclosure. It is available as a DIY kit...

The MS-420 is an easy-to-build adaptation of the classic Korg MS-20 Low Pass Filter. The circuit has been modified to run on a single 9V...

PSU relocation done for Cameron Dobb in November 2023. Cameron wanted to play his lap-steel on top of his Nord, and the noise from the...

I was approached by some composers who explained a need for a performance-oriented MIDI fader controller. They and I liked Notes and...

In Fall 2023 4 synth nerds met up to attempt a Lyra 8 build. They spent 12 hours and only got about half-way done. The case was a maple...

Introduction Commune with the invisible forces surrounding you. SIGIL is an active contact microphone you can assemble yourself. Use the...

Introduction Difficulty Level: Intermediate Build Time: 3 hours This guide will provide step-by-step instructions for assembling the...

A ghostly joystick module to commune with ancestral patches. Ouija is an unconventional joystick module. It takes the core concept of a...

The Coven LFO Eurorack Module is a 4HP, easy to build DIY kit that offers square, saw, triangle and stepped random outputs. It features a...